Approvals & sign-off · 3 November 2026

Picture lock: how to get a real sign-off before grade and sound

A real picture lock is a sign-off on one numbered version of the edit, confirmed in writing by the client’s named decision maker, together with a short agreed list of what may still change. After that, shot order and timing are fixed, the grade, sound and finishing start, and any change to the cut is handled as new work with its own time and cost. The lock is an agreement, not a law of nature, so its value depends entirely on how clearly it was made.

What does picture lock actually lock?

The structure and timing of the edit, down to the frame.

Wikipedia describes picture lock as the point before online editing when every change to the cut has been made and approved. In practice that means three things are fixed: which shots are in the film, in which order, and for exactly how long. The total length is fixed with them. What is not automatically fixed is everything that sits on top of the picture or inside a shot without changing its timing, and that is where most disputes start. The way to avoid them is to write down, at the moment of lock, which category each thing falls into.

CategoryExamplesAfter lock
LockedShot order, cut points, shot durations, total lengthChanges reopen grade, sound and finishing
Can still change, as agreedText of supers, legal lines of the same length, end card details, product or packshot updates inside a locked shot, VFX work within the locked framesExpected; no new round needed
Not yet decidedThe grade, the final mix, music level, caption filesDecided in their own rounds

Why does picture lock matter so much?

Because everything after it is built on the exact timing of the cut.

Once picture is locked, the colorist grades shot by shot, the sound team builds the mix against every cut point, VFX and graphics are rendered to exact frame ranges, and the deliverables are cut down from the master. ECG Productions’ guide, updated in June 2026, describes how a change after lock ripples through all of them: sound has to be resynced, grading revisited, effects repositioned or rendered again.

It is fair to say that lock is often broken. A November 2025 panel in Production Expert, made up of audio post professionals, describes picture changes after mixing has started as routine, with sound teams relying on conform tools that compare the old and new edit decision lists. The panel’s advice to producers is that a re-conform takes real time, and that when a large share of the picture changes, the work is closer to a new edit and mix than to a small adjustment. That is the honest case for a clear lock: not that changes will never happen, but that everyone can see when one does and what it costs.

How do you sign off picture lock properly?

On one version, with the right people, against a checklist, in writing.

  1. Name the version. “Round 3, v9” rather than “the latest cut”. Everyone must be approving the same file.
  2. Check who has seen it. The named decision maker, plus anyone whose remit is in the film: legal for claims and required lines, a market lead for a local version. Someone seeing the film for the first time after lock is the most common reason a lock breaks.
  3. Run the checklist before asking. Length to the frame, every shot a final choice rather than a placeholder, temporary graphics flagged as temporary, the music track and its edit points agreed.
  4. Ask for a one-line confirmation. “We approve v9 as picture lock. Supers and legal lines may still change if their timing stays the same.” Keep it with the project.
  5. Hand off cleanly. Export the edit decision list and the files your colorist and sound team ask for, so post starts from the locked version and nothing else.

Write the lock date into the schedule at the start of the project, with the grade and the mix booked behind it. A lock date that only appears when the edit is done is easy to postpone; one that has the colorist’s days hanging off it is not. How lock fits between the other rounds is covered in what counts as a revision round, and for a music video, where the artist and the label both have a say, in who signs off on a music video.

What may still change after lock?

Whatever you agreed, as long as it does not change the timing.

The agreed list from the table above is not a loophole; it reflects how commercials are finished. Supers are corrected, a legal line is updated by the client’s lawyers, a product’s packaging changes before launch. In CGI the last one can be cheap. Not Important Studio has written about how a late label change on a 3D product means replacing the label in the scene file and rendering again, instead of reshooting. Even then, a new render of a locked shot has to keep the same frame range, or it is no longer inside the lock.

What is not on the list: trimming a shot, swapping a take, moving the end card, or adding a shot “because there is room”. Each of those changes the timing that grade, sound and every cutdown on the deliverables list depend on.

How do you handle a change after lock?

As a new round with a visible cost, approved by the same person who locked.

  1. Log the request with the name, the date and the version it refers to.
  2. Show the impact: which shots, and which work has to be redone in grade, sound, VFX and versions.
  3. Give time and cost before anyone starts.
  4. Get the decision maker’s approval, not just the requester’s.
  5. Make a new version and confirm the new lock in the same one-line format.

Showing exactly what changed helps the client approve the new version quickly. In Kadrenta, made by the same team behind The Production Brief, Compare lets you wipe between two rounds so the client sees the difference on the frame, and the help pages explain that an approval is written into the conversation as a comment, so the decision is visible next to the work. A reviewer on a link can approve or comment, and there is no reject button; anything that is not an approval arrives as a note to act on. Every project also keeps an activity log, so the original lock and the change after it can be traced later.

What is the one habit that makes locks hold?

Asking “who else will see this before it airs?” before you ask for the lock.

Most broken locks are not caused by indecisive clients but by a person who had not seen the film. A senior sponsor, a regional office or a legal reviewer joins after lock and, quite reasonably, has notes. Ask the question a week before lock, invite those people to the last round before it, and the lock you get will be one that the whole client side has actually agreed to.

Frequently asked questions

Can supers and legal lines change after picture lock?

Usually yes, if you agreed that up front and the change does not alter the timing. A longer legal line that needs more screen time is a timing change and reopens the edit.

Who should be in the room for picture lock?

The named decision maker at minimum, plus anyone whose remit is in the cut, such as legal for claims. It is also the last cheap moment for a senior sponsor to see the film.

Is picture lock the same as final approval?

No. Picture lock approves the edit. The grade, the sound mix and the finished deliverables each still need their own approval afterward.

What if the client refuses to lock?

Then post cannot plan reliably, and the schedule should say so. Offer a lock date with the grade and mix booked behind it, and show what slips if it moves.

Sources